6 Meter (18ft) Automatic Rewinding Guy Wire
- SKU: F7144
- Weight: 0.22g
- UPC Code: 641378086397
This is a 6m (19.7ft) long automatic rewinding stainless steel guy wire with lock, designed for use with Fanotec poles with maximum extension below 6m. Unlocked and the guy wire extends/reels in as pole is extended/collapsed. Locked and the guy wire can be tensioned by raising the pole further. Together with the pole support bearing, a set of three guy wires can substantially enhance stability of pole in strong winds and/or when the loading is near the recommended maximum. A single guy wire can be used as a support or safety measure for horizontal pole application or when using the pole upside down.
A set of 3 are recommended as well as the Pole Series 2 Support Bearing.
Note: The reels will be positioned very close to the ground. Please be careful when using around sand, dirt or water as this may effect functioning if reels get dirty or wet.
Log in to write a Question, or send us your Question via the contact form
© 2013-2024 Fanotec® - Nodal Ninja® | All rights reserved. | Manufactured by Fanotec® in Hong Kong.